American Sports Builders Association

American Sports Builders Association

Presentations from the Technical Meeting December 1-4, 2006 at The Plaza Resort and Spa, Daytona Beach, Florida

Note: These presentation materials represent the opinions of the presenters, and are not necessarily the opinion of the ASBA. The choice of construction materials and methods varies widely depending on such factors as topography, drainage, weather, soil type, anticipated use, and other factors. Users should consult a qualified contractor or design professional before employing any of the construction methods or materials demonstrated in these presentations. No construction material or equipment is endorsed or approved by the ASBA.

  1. Aggregates 101 — Presented by: John P. Hellyer, Luck Stone (PowerPoint)

  2. ASBA Self-Leveling & Patching Materials — Presented by Seth Pevarnik, Manager of Technical Service, Ardex Engineered Cements (PowerPoint)

  3. Placement of Field Events in a Multi-Use Synthetic Turf Venue, Part One & Part Two — Presented by: Beals Alliance, Inc., Jay Beals — President and CEO, Tony Wood — Associate Sr. Landscape Architect (PowerPoint)

  4. Fundamentals of Indoor Sports Floors: From Rubber to Polypropylene! (PowerPoint)

  5. EN 14904 — Introduction by: Remo van der Wilt, Export Manager, Pulastic Sports Surfaces, The Netherlands, (PowerPoint)

  6. Is the Facility Ready for the Track Surface? Presented by Don Smith, ASBA (Word)

  7. ASBA "Turf Manufacturing 101" (Word)


                    Privacy Policy

Copyright ASBA 2018
9 Newport Drive, Suite 200, Forest Hill, MD 21050
Phone: 866-501-ASBA (2722)  -  410-730-9595
Fax: 410-730-8833